Pierced Tools
-
16g Threadless Taper for Internally Threaded Body Jewelry
1 – Reward points -
14g Threadless Taper for Internally Threaded Body Jewelry
1 – Reward points -
Threaded Taper - 14g with 1.2mm Internal Threading
1 – Reward points -
18g Threadless Taper for Internally Threaded Body Jewelry
1 – Reward points -
Threaded Taper - 16g with .9mm Internal Threading
1 – Reward points -
Threaded Taper - 16g with .8mm Internal Threading
1 – Reward points -
Curved Mosquito Hemostat Forcep - 5"
5 – Reward points -
Threaded Taper - 18g with .9mm Internal Threading
1 – Reward points -
Straight Mosquito Hemostat Forcep - 5"
3 – Reward points -
Flat Nose Hemostat Dermal Insertion Tool by Shawn O'Hare
6" Flat Nose Hemostat tool by Shawn O'Hare for Dermal Anchor Insertion.
410 ASTM Stainless Steel. The best tools on the market right now. With the flat nose of this hemostat, you can clamp any size dermal anchor head. Because the head of this hemostat is flat, inserting the dermal anchor remains flush against the body.
4 – Reward points -
True 6" Septum Forceps - Design 1
6" long high quality 410 Surgical steel Septum Forcep.
Head "receiving tubes" are big enough to allow up to a 10g Needle to pass through with ease.
This is the true septum forcep. It has a big enough space under the tubes to allow the bridge of the nose to not get pinched when squeezing the forcep together.
4 – Reward points -
Small Ring Closing Pliers
5" pliers for small to medium rings. 410 ASTM surgical stainless steel and fully autoclavable. You can sterilize these repeatedly without rusting. These pliers have deep grooves on the head end for captive rings 1/2" and smaller.
Perfect tool for rings 20g - 8g
4 – Reward points -
True 6" Septum Forceps - Design 2
6" long high quality 410 Surgical steel Septum Forcep.
Head "receiving tubes" are big enough to allow up to a 12g Needle to pass through with ease.
These forceps are for septums, but they also work very well for lining up nipple piercings, ear piercings, and even eyebrow piercings.
4 – Reward points -
Thin 5" Dermal Anchor Holder Steel Forceps
Thin MicroDermal Surface Anchor Holder Tool - Great for Changing Tops
5 – Reward points -
Dermal Anchor Assistant Tool by Jason Coale
This tool was designed by Jason Coale.
- 2.45" Long
- 14g Thick at the Rod
- .8mm Thick Head
- 2.8mm Wide Head
This tool is similar in design to a shoe horn. You would use this to drop the heel of the anchor into the hole much like a shoe horn. This tool also works well for removal.
2 – Reward points -
Small Ring Opener - 5"
5 inch ring opening pliers with 2 notches for opening and a needle nose tip for tight spaces.
Opens captive rings to help in removing and inserting beads.
Works best on rings from 1/4" to 5/8" in diameter, and up to 8 gauge in thickness.
4 – Reward points -
Dermal Anchor Forceps with Diamond Jaw
5" length. Made from high grade 410 ASTM surgical steel.
Excellent for inserting dermals.
4 – Reward points -
Black Oxide Coated Slotted Mini Pennington Forceps
Visually appealing black oxide coated steel pennington forceps. Not only do they look good, they also help prevent eye fatigue by reducing light glare when in use. But best of all, the black oxide also acts as a protection against corrosion, giving your tools a longer life.
These small sized pennington forceps are excellent for clamping hard-to-reach or tighter areas during a piercing procedure.
This tool measures at a total of 6” long with the inner tip measuring 11mm long and 5mm wide at the top.
The slotted opening is 2mm, which will clear needles up to 14g.Specs
- Material: 410 ASTM Stainless Steel with Black Oxide Coating
- Forceps Length: 6”
- Inner Tip Length: 11mm
- Inner Tip Width (at top): 5mm
- Slot Opening: 2mm
- Serrated jaws for secure grip
- Interlocking teeth near finger loops
8 – Reward points -
Mini Ring Opener - 3 & 3/4"
Mini Ring Opening Pliers - Perfect for Tight Places.
Opens ring to help in removing and inserting beads from captive rings.
Works best on rings from 1/4" to 3/8" in diameter and up to 14 gauge in thickness.
Great ring opening pliers for when doing tragus, eyebrow, ear, or any small, tight piercings.
7 – Reward points -
7" Lightweight Opener and Closer Combo Tool
Multi-purpose opener and closer. Autoclave and reuse. Not intended for heavy gauge rings. Not a replacement for traditional openers and closers.
7 – Reward points -
Threaded Taper - 10g with 1.2mm Internal Threading
Taper is 10g at its thickest point and has a 1.2mm x 2.0mm thread on the end. Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. Measures 1 inch in length(25mm long) Autoclave safe.
1 – Reward points -
Ball Grabbing Tweezers
3 – Reward points -
Black Oxide Coated Slotted Mini Forester Forceps
Visually appealing black oxide coated steel pennington forceps. Not only do they look good, they also help prevent eye fatigue by reducing light glare when in use. But best of all, the black oxide also acts as a protection against corrosion, giving your tools a longer life.
These small sized pennington forceps are excellent for clamping hard-to-reach or tighter areas during a piercing procedure.
This tool measures at a total of 6.5” long with the inner tip measuring 8mm long and 4.7mm at its widest point.
The slotted opening is 2.2mm, which will clear needles up to 14g.Specs
- Material: 410 ASTM Stainless Steel with Black Oxide Coating
- Forceps Length: 6.5”
- Inner Tip Length: 8mm
- Inner Tip Width: 4.7mm
- Slot Opening: 2.2mm
- Serrated jaws for secure grip
- Interlocking teeth near finger loops
8 – Reward points -
Medium Ring Opener - 6"
Ring Opening Pliers with 3 Notches and a needle nose for tight spaces.
Opens captive rings to help in removing and inserting beads.
Works best on rings from 1/4" to 3/4" in diameter, and up to 6 gauge in thickness.
5 – Reward points -
Tweezer Style Mini Pennington Forceps
Tweezer style triangle end forceps with locking mechanism.
Great alternative to regular forceps due to being lighter and smaller than regular forceps. Easy to use with one hand.
These tweezer forceps are approximately 5-3/4". They have a 12mm head with a 7mm inner hole diameter.
These forceps are only available without slots.
4 – Reward points -
Threaded Taper - 12g with 1.2mm Internal Threading
Taper is 12g at its thickest point and has a 1.2mm x 2.0mm thread on the end. You are purchasing 1 taper
1 – Reward points -
13 Piece CALOR Style Insertion Taper Set - 18g to 00g
These Calor Style tapers are made with Medical Grade 304 Stainless Steel. They can be autoclaved and reused.
Each taper is approximately 2" in length and tapers down 2 gauges smaller than the listed size for easy insertions.
For example, the 0g (8mm) taper at its thinnest point is approximately 4g (5mm).Calor Style Tapers are thicker and recessed at the large end so you can fit the jewelry inside the taper; this makes for a seamless flow from taper to insertion of jewelry and helps to prevent slipping.
Taper Dimension Chart:
Gauge Diameter Inner Diameter 00g 10.4mm 10mm 0.5g 9.50mm 9mm 0g 8.40mm 8mm 1g 7.30mm 7mm 2g 6.40mm 6mm 4g 5.25mm 5mm 6g 4.35mm 4mm 8g 3.20mm 3mm 10g 2.65mm 2.5mm 12g 2.25mm 2mm 14g 1.75mm 1.6mm 16g 1.35mm 1.2mm 18g 1.20mm 1mm 22 – Reward points -
Nostril Pin Bending Pliers
Bend the perfect nostril screw every time! Over the years we have heard many piercers ask for either shorter or longer nostril screws, or screws with more acute or obtuse bends on the end.
This tool eliminates those problems. Use this tool with out U-Bend nostril pins.
You pick the wearable area, and the degree of the screw bend. Scroll down for detailed instructions on how to use this item.
Crafted from 410 ASTM Stainless Steel.
9 – Reward points -
8g Suspension Hook
This 8g suspension hooks prototype was tweaked several times until perfection.
3 – Reward points -
Stainless Steel Straight Flat Tip Mosquito Forceps - 5"
These implant-grade stainless steel forceps have a flat 5/8” tip that is ideal for clamping flat jewelry in hard to reach areas, like the high nostril or daith.
The rounded point and flat tip provide easy maneuvering without the risk of puncturing or injury.
The thickest part of the tip measures at under 2mm and the thinnest part at the edge is just under 1mm.
This tool also features interlocking teeth that will hold the jewelry in place.
5 – Reward points -
PTFE Threading Tool - 16g & 14g
PTFE threading tool that works on both 16g & 14g PTFE.
You will receive 1 threading tool. On one side you can thread 16g - 1.2mm and on the other side you can thread 14g - 1.6mm
A two-in-one tool with a nice textured grip for easy threading.
Made from 410 ASTM Steel and is 3" (75mm) long and 8mm (5/16") thick.
6 – Reward points -
Medium Ring Opener - 7"
7 – Reward points -
5-1/2" Brass Tipped Flat Nose Bending Pliers
8 – Reward points -
Plastic Gauge Wheel
12 – Reward points -
Threaded Taper - 8g with 2.0mm Internal Threading
Taper is 8g (3mm) at its thickest point and has a 2.0mm x 2.0mm thread on the end. You are purchasing 1 taper
1 – Reward points -
Threaded Taper - 10g with 2.0mm Internal Threading
1 – Reward points -
6.1” Digital Caliper with LCD Readout and Storage Case
13 – Reward points -
Steel Gauge Wheel
25 – Reward points -
6 Piece MEDIUM CALOR Style Insertion Taper Set - 7/16" to 1"
6 Piece Medium Calor Style Insertion Taper Set - 7/16" to 1"
Affordable large gauge tapers.
Each Taper Measures 2" in Length.
These are the Calor Style of Tapers. Calor Style Tapers are thicker and recessed at the large end so you can fit the jewelry inside the taper; this makes for a seamless flow from taper to insertion of jewelry and helps to prevent slipping.
You will get one of each of the following Tapers per set: 7/16" 1/2" 5/8" 3/4" 7/8" 1"
6 Total Tapers in this set.
49 – Reward points -
16 Piece Steel Eyelet Taper Set 10g - 11/16"
These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused.
These are perfect for sizing up your eyelets. There is no chance of the jewelry slipping. This set includes some odd sizes that you won't find anywhere to get that perfect stretch for your new jewelry.
16 piece set comes in a handy zip pouch and includes one of each of the following sizes: 10g, 8g, 6g, 4g, 2g, 1g, 0g, 0.5g, 00g, 7/16", 12mm, 1/2", 9/16", 15mm, 5/8", 11/16"
It is recommended you use single flare eyelets with these.
40 – Reward points -
8 Piece Steel Eyelet Taper Set 18mm - 25mm
These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused.
These are perfect for sizing up your eyelets. There is no chance of the jewelry slipping. This set includes some odd sizes that you won't find anywhere to get that perfect stretch for your new jewelry.
8 piece set comes in a handy zip pouch and includes one of each of the following sizes: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm
It is recommended you use single flare eyelets with these.
35 – Reward points -
4 Piece Large Insertion Taper Set - 1-1/4" to 2"
These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused.
These are sold in a set only, from 1-1/4" up to 2" and come in a handy carry pouch.
85 – Reward points