Power Supplies

This wireless battery pack is compatible with most rotary tattoo machines on the market..

These magnet feet will help keep your power supply in one place.  Each foot comes with a nut for a tighter fit.

The diameter of the magnet we currently have in stock is a little larger than what is pictured, but rest assured, it is not intrusive.

These magnets are quite powerful.

Unlock your peak potential using the Dotwork Box by Peak for dotwork tattooing. 

This mechanism is designed to help artists perform dotwork at their best by easily adjusting the delay speed of their machine. The delay knob at the center of the box mechanism turns both clockwise and counterclockwise to configure the rhythm and pattern of your machine on a scale of 40 up to 00.
The result? Clean dot patterns.
To use the Dotwork Box at peak level, only use with medium or hard hitting coil tattoo machines. Using the dot box with a rotary machine will damage the motor. 

Other tips for a peak-level performance: use only with tight needle groupings, alter the voltage of your machine for varied dotwork results, and adjust your tattooing speed so it matches your chosen delay speed settings. This means, you will need to tattoo faster at faster settings and more slowly at slower settings.

The Dotwork Box comes with a 1/4” mono plug to connect to a power supply that must be purchased separately. The Dotwork Box only configures the delay speed of your machine for dotwork procedures. It is not a power supply.

Keep your workstation organized while charging your Critical Universal Batteries with the Critical Universal Battery Dock. Compatible for both RCA and 3.5mm connection type batteries.

Great for keeping your power supply in one spot on a smooth surface. 

These 28mm x 12mm suction cups are equipped with a 3.7mm wide screw. Each suction cup comes with a 7.0mm x 7.0mm nut to ensure a tighter fit.

The Musotoku power supply works with any rotary** and coil-machine. No start-up cable is required for the Cheyenne. Thanks to the high current of Musotoku (5A), it is much easier to adjust your coil machine, and it becomes less hot even after long-term use.

Please refer to the User Manual linked below.

• Output power: 5A continous power, 10A peak. Overcurrent protection (3 types)
• Voltage: 2 to 16V, adjust in 0.1V steps, adjusting dial with infinite turns
• Setup memories: 4 auto-record memories (non-volatile)
• NITRO pulse: Fast startup (configurable)
• Footswitch model: X3 modes: Normal, Maintained and One-Touch. Pedal push detection (LED)
• Dimensions: 116X72mm, 24mm height (4.5X2.8X0.9inch)
• Weight: 169gr (5.9oz)
• Material: 2mm aircraft grade solid aluminium
• Input voltage: 19V, Worldwide compatible
• Plug: standard clipcord and footswith input 1/4inch jack
• 1 year warranty
• Made in Spain

**The LACEnano machine is known to be an exception and will not work with any standard power supply in the market either. The LACEnano, is built around a special 3-phase brushless motor and needs to be powered exclusively by the LACEnano power unit.

The Musotoku power supply works with any rotary** and coil-machine. No start-up cable is required for the Cheyenne. Thanks to the high current of Musotoku (5A), it is much easier to adjust your coil machine, and it becomes less hot even after long-term use.

Please refer to the User Manual linked below.

• Output power: 5A continous power, 10A peak. Overcurrent protection (3 types)
• Voltage: 2 to 16V, adjust in 0.1V steps, adjusting dial with infinite turns
• Setup memories: 4 auto-record memories (non-volatile)
• NITRO pulse: Fast startup (configurable)
• Footswitch model: X3 modes: Normal, Maintained and One-Touch. Pedal push detection (LED)
• Dimensions: 116X72mm, 24mm height (4.5X2.8X0.9inch)
• Weight: 169gr (5.9oz)
• Material: 2mm aircraft grade solid aluminium
• Plug: standard clipcord and footswith input 1/4inch jack
• 1 year warranty
• Made in Spain

**The LACEnano machine is known to be an exception and will not work with any standard power supply in the market either. The LACEnano, is built around a special 3-phase brushless motor and needs to be powered exclusively by the LACEnano power unit.

Say hello to the XR by Critical! 

As a long-time, leading manufacturer of high quality power supplies, Critical lets the numbers and it's history speak for itself. 

Some of the new and improved features:

• New-Full color TFT display with user selectable color themes and large easy to read fonts.
• New-Billet aluminum CNC machined housing
• New-Carefully tuned Capacitive touch user interface
• New- mount design for more mounting flexibility.
• New- Jump start feature and maintained pedal modes now independently assignable to preset/output buttons
• New- Genuine high quality Amphenol 1/4” jacks for better power delivery and long life.
• Single output on the XR model.
• 4 amp peak current, 2 amp continuous
• Session meter based on user set hourly rate: session mode, run time mode, or hybrid mode (new “Hybrid” billing mode automates user input)
• Pedal override button: No need for a foot pedal
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Time of day
• Voltage presets with 2, 4, or 6 machine memory modes
• Non-volatile memory
• Universal input 90-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full manufacturer warranty
• Included: XR power supply, Magnet mount, US power cord and switching power adapter
• Made in the USA

Experience the freedom and comfort that comes with a cordless foot switch. Control the ON/OFF function of Critical Connect Universal Battery or Shorty battery packs through two modes:  Continuous & Momentary. 

Features & Benefits: 

• Multi-color LED light status & battery life indicatory 
• Non-skid rubber bottom 
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability & cordless freedom  
• Continuous & Momentary Mode Enabled 
• Critical Connect Universal Batteries are compatible & wirelessly connect with ONLY the Critical Connect Foot Switch (simultaneously, the Critical Connect Foot Switch is ONLY compatible with Critical Connect batteries)
• Can also be used with any standard clip cord 
• Size: 1” H x 5” D  
• Weight: 8.6 oz 
• 2-year manufacturer warranty 
• Made in the USA
• (2) AAA Batteries Included 
• Instruction Manual Included

Never set a voltage again, this is like cruise control for your brushed rotary machine. Run lower speeds than ever before while still retaining the same hitting power!

Get accurate speed readings from your brushless and coil machines. 

*Note - ESCx mode only supported on brushed rotary machines

• Proprietary machine specific motor control software drivers.
• Smart start calibration starts even the hardest machines.
• Speed (hz) or Volt (v) dual modes of operation.
• 1/4"-20 threaded mount. 
• Multi-Function clamp with ballhead arm included.
• Capacitive touch buttons that will never wear out.
• Flash memory saves all user settings.
• Screen flip option allows unit to be run in multiple orientations.
• Switchcraft® locking power connector.
• Rean® all metal 1/4" machine and pedal jacks rated to 5000+ mating cycles. 
• Dual confgurable I/O ports (machine/pedal)
• 5 machine calibration banks.
• 5 speed and 5 voltage presets for each calibration bank. 
• High contrast 2.4" OLED screen with wide viewing angle.
• Wireless Bluetooth® foot pedal coming soon! (sold separately)
• Mobile apps provide touch-less voice control options to reduce cross contamination.
• Over the air device firmware updates with bluetooth mobile app.
• iOS™ and Android™ devices supported.
• IP67 enclosure and sealed connectors prevent any contamination from ever reaching inside the unit.
• Dual voltage power adapter included for international operation (110/220v).
• 2 pack calibration cartridges included. 

The Lazur Tattoo Power Supply by Peak offers artists the power they need to tattoo at their peak. This power supply features dual inputs and power knobs for operating up to two machines at once. Peak tattooing begins with a short-press of either power knob. Short pressing either knob also enables you to switch from momentary to continuous mode, or switch between two operating machines, making the transition from lining to shading or color packing as convenient as possible. Both power knobs allow you to easily perform separate voltage adjustments for your two active machines. For a peak-level strong start function, long-press either of the two knobs.

While tattooing, you can easily check your output voltage, amps, and speed (Hz) using the clear display screen on the face of the supply. The Lazur Power Supply goes to sleep after 5 minutes of inactivity. Wake it back up with a quick tap of your foot pedal or a short-press of the active power knob.

The Lazur Tattoo Power Supply has a magnetic bottom for a sturdy setup. It comes equipped with a US power cable, adapter, and 20 disposable Peak-certified protective knob caps. International artists can purchase the Euro power cord separately. A detailed insert is also included for comprehensive operating instructions and our warranty information. For machine warranty information, visit www.peakneedles.com

Key Features:

• Measurements: 7.2” (L) x 4.8” (W); 3.1” (H)
• Dual inputs and power knobs; operates 2 machines
• Display screen shows output voltage, amps, and speed (Hz)
• 100v–240v input voltage
• 0v–18v output voltage with 1v adjustment increments
• Start-up voltage is 10v; can be adjusted
• 3.4A input current
• Magnet bottom for peak-level setup
• 2 USB 2A charging ports; can be used with other devices
• Equipped with built-in short circuit protection
• Works with standard 1/4” clip cords and foot pedal connections
• Equipped with US power cable, adapter, and 20 disposable Peak-certified knob caps
• Euro power cord purchased separately

The Critical Tattoo CXP19 Wireless Foot Pedal and Critical XRR Tattoo Power Supply bring the necessities of efficiency, durability, and convenience to your tattoo shop or convention set-up. The CXP19 features a non-skid rubber bottom and comes with a reinforced shielding which stops debris from getting inside the pedal. While this foot pedal operates wirelessly, it can also be used with any standard clip-cord/rca cord. It has an ultra responsive center switch as opposed to multiple contact springs like other brands and can run alongside multiple foot pedals without any interference. This foot pedal is intended to be used specifically with the Critical XRR Power Supply.

The XRR Power Supply, much like previous XR models, includes the new hybrid billing view which allows artists to view their session time and cost simultaneously. Another new feature of this power supply includes the magnetic mounting system. This mounting system, which is included with your purchase, can be rotated into one of four different positions for a totally configurable setup. This power supply must be mounted before tattoo procedures. This mounted design is created for ultimate flexibility and also ensures the power supply can be easily bagged with standard machine or bottle bags for optimal protection against cross contamination.

This kit comes complete with 1 XRR power supply, 1 magnet mount, 1 CXP19 wireless foot pedal with 2 AAA batteries, and 1 US power cable.

Critical Tattoo® XRR Power Supply Specifications:

• Billet aluminum CNC-machined housing
• Compatible with all coil and rotary machines
• Easy-to-read, full-color TFT display; configurable color scheme
• Designed to be mounted for user flexibility and convenience
• Capacitive-touch user interface; tuned carefully
• Display screen shows time of day and voltage output
• Session meter based on user set hourly rate: session mode, run time mode, or NEW hybrid billing view (automates user input, shows billing and session time simultaneously)
• Non-volatile memory ensures voltage presets are maintained even when power is removed
• Assign jumpstart feature/maintained pedal modes to preset/output buttons
• Precision regulated set point voltage 0–1v
• 0.1 volt adjustment resolution
• Jumpstart mode enabled for hard starting machines
• Pedal override button (no need for foot pedal if you run continuous mode)
• Universal input (90-240vac 50/60Hz)
• Peak Current: 4amp; 2amp continuous current
• High-quality amphenol 1/4" jack inputs for better power delivery and long life
• Built-in short circuit protection
• 2-year manufacturer’s warranty
• Easily bagged with typical machine or bottle bags
• Comes with US Power cord, magnetic mounting system, and switching power adapter
• Manufactured in the USA

Critical Tattoo® CXP19 Wireless Foot Pedal Specifications:

• Net Weight: 8.6oz
• Dimensions: 5” diameter; 1” (H)
• Compatible with Critical XRR tattoo power supply
• Features one central switch for optimal responsiveness
• Durable shielding prevents debris from getting inside
• Equipped with non-skid rubber bottom for sturdy setup
• Wireless, but compatible with standard clip cord connections
• Artists can run multiple without interference
• Requires 2 AAA batteries; batteries included with purchase
• Easily bagged with typical machine or bottle bags
• 2-year manufacturer’s warranty
• Manufactured in the USA

Critical Tattoo is constantly striving to provide tattoo artists with American-made products that are innovative, elegant, and satisfactory.

Comes now the XRR which maintains all of the favored qualities of previous Critical Tattoo Power Supplies. The Critical Tattoo XRR Power Supply offers even more additional features that allow for optimally efficient tattooing. 

Just like their previous models, artists can enjoy an easy-to-read, full color display screen with the option to select your preferred color scheme. The touch user interface allows easy adjusting of the voltage, selecting presets, and other configurable options with the lightest touch. This power supply has a precision regulated set point voltage of 0–1v.

The XRR Power Supply, much like previous XR models, includes the new hybrid billing view which allows artists to view their session time and cost simultaneously. Another new feature of this power supply includes the magnetic mounting system. This mounting system, which is included with your purchase, can be rotated into one of four different positions for a totally configurable setup. This power supply must be mounted before tattoo procedures. This mounted design is created for ultimate flexibility and also ensures the power supply can be easily bagged with standard machine or bottle bags for optimal protection against cross contamination.

This listing is for one Critical Tattoo® XRR Power Supply, complete with the mounting system, an informative insert, and a US power cable.

Specifications:

• Billet aluminum CNC-machined housing
• Compatible with all coil and rotary machines
• Easy-to-read, full-color TFT display; configurable color scheme
• Designed to be mounted for user flexibility and convenience
• Capacitive-touch user interface; tuned carefully
• Display screen shows time of day and voltage output
• Session meter based on user set hourly rate: session mode, run time mode, or NEW hybrid billing view (automates user input, shows billing and session time simultaneously)
• Non-volatile memory ensures voltage presets are maintained even when power is removed
• Assign jumpstart feature/maintained pedal modes to preset/output buttons
• Precision regulated set point voltage 0–1v
• 0.1 volt adjustment resolution
• Jumpstart mode enabled for hard starting machines
• Pedal override button (no need for foot pedal if you run continuous mode)
• Universal input (90-240vac 50/60Hz)
• Peak Current: 4amp; 2amp continuous current
• High-quality amphenol 1/4" jack inputs for better power delivery and long life
• Built-in short circuit protection
• 2-year manufacturer’s warranty
• Easily bagged with typical machine or bottle bags
• Comes with US Power cord, magnetic mounting system, and switching power adapter
• Manufactured in the USA

Say hello to the XR-D by Critical! 

As a long-time, leading manufacturer of high quality power supplies, Critical lets the numbers and it's history speak for itself. 

Some of the new and improved features:

• New-Full color TFT display with user selectable color themes and large easy to read fonts.
• New-Billet aluminum CNC machined housing
• New-Carefully tuned Capacitive touch user interface
• New for the XR-d is a built in oscilloscope for a visual approach to coil machine tuning
• New- mount design for more mounting flexibility.
• New- Jump start feature and maintained pedal modes now independently assignable to preset/output buttons
• New- Genuine high quality Amphenol 1/4” jacks for better power delivery and long life.
• Dual Outputs on the XR-d model
• 4 amp peak current, 2 amp continuous
• Session meter based on user set hourly rate: session mode, run time mode, or hybrid mode (new “Hybrid” billing mode automates user input)
• Pedal override button: No need for a foot pedal
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Time of day
• Voltage presets with 2, 4, or 6 machine memory modes
• Non-volatile memory
• Universal input 90-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full manufacturer warranty
• Included: XR-D power supply, Magnet mount, US power cord and switching power adapter
• Made in the USA

Enjoy 10 extra hours of tattooing power with this replacement PowerBolt by FK Irons. This detachable pack easily hooks up to your Flux Rotary Tattoo Machine for snap-and-go tattooing. With a fast charging speed of up to 1.5 Amps, the battery can run for up to 10 hours depending on your preferred voltage settings and cartridge needles. With an extra battery on hand, that means up to 20 hours of battery life for tattooing large-scale, multiple-session pieces.

Additionally, the PowerBolt comes with a super convenient kill-switch feature, allowing you to turn it off indefinitely while flying to your next event, guest spot, or convention. To turn the battery back on again, simply insert a USB cable.

The Ultimate Wireless Tattooing Experience

The Critical Connect Universal Battery utilizes Bluetooth 5.0 and Critical Core technology - created for consistent power and extreme accuracy. Experience ultimate power, freedom, and versatility.

Features & Benefits:

• Crisp OLED Display & Precise Voltage
• Ergonomic Design
• Utilizes Bluetooth 5.0 Technology
• Utilizes Critical Core – created for consistent power and extreme accuracy.
• Available in both RCA & 3.5mm connections
• Compatible with most rotary brands
• Featured jumpstart assist for large needle groupings and hard starting motors
• Control the ON/OFF function of the batteries through two modes: Continuous & Momentary
• Compatible & wirelessly connects with the Critical Connect Foot Switch*
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability & cordless freedom
• Dual charging capable dock (optional)
• Up to 5+ hours of tattoo time
• Voltage Range 4.5v – 13v
• Size: 2” L x 1.2” W
• Weight: 1.5 oz
• USB-C Charger Cable Included
• Instruction Manual Included

* = Critical Connect Universal Batteries are compatible & wirelessly connect with ONLY the Critical Connect Foot Switch (simultaneously, the Critical Connect Foot Switch is ONLY compatible with Critical Connect batteries)Patents:

• US Patent 10471246 & other US Patents Pending
• AU Patent 2019359618
• CN Patent 202030297770.3 & other CN Patents Pending
• EU Patents Pending
• CA Patents Pending

True power comes in a small package with the Critical Connect Universal Battery Shorty,one of the lightest and smallest battery packs on the market. Perfect for quick sessions, PMU artists, and tattoo artists who prefer an overall lighter weight.

Features & Benefits:

• Crisp OLED Display & Precise Voltage
• Ergonomic Design
• Utilizes Bluetooth 5.0 Technology
• Utilizes Critical Core – created for consistent power and extreme accuracy.
• Available in both RCA & 3.5mm connections
• Compatible with most rotary brands
• Featured jumpstart assist for large needle groupings and hard starting motors
• Control the ON/OFF function of the batteries through two modes: Continuous & Momentary
• Compatible & wirelessly connects with the Critical Connect Foot Switch*
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability & cordless freedom
• Dual charging capable dock (optional)
• Up to 5+ hours of tattoo time
• Voltage Range 4.5v – 13v
• Size: 2” L x 1.2” W
• Weight: 1.5 oz
• USB-C Charger Cable Included
• Instruction Manual Included
• The Shorty is one of the lightest & smallest battery packs on the market

* = Critical Connect Universal Batteries are compatible & wirelessly connect with ONLY the Critical Connect Foot Switch (simultaneously, the Critical Connect Foot Switch is ONLY compatible with Critical Connect batteries)Patents:

• US Patent: 10471246
• AU Patent: 2019359618
• CN Patents: Pending
• CA Patents: Pending

Power up your extra batteries using the Efest Slim K2 USB Battery Charger. 

True power comes in a small package with the Critical Connect Universal Battery Shorty,one of the lightest and smallest battery packs on the market. Perfect for quick sessions, PMU artists, and tattoo artists who prefer an overall lighter weight.

Features & Benefits:

• Crisp OLED Display & Precise Voltage
• Ergonomic Design
• Utilizes Bluetooth 5.0 Technology
• Utilizes Critical Core – created for consistent power and extreme accuracy.
• Available in both RCA & 3.5mm connections
• Compatible with most rotary brands
• Featured jumpstart assist for large needle groupings and hard starting motors
• Control the ON/OFF function of the batteries through two modes: Continuous & Momentary
• Compatible & wirelessly connects with the Critical Connect Foot Switch*
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability & cordless freedom
• Dual charging capable dock (optional)
• Up to 5+ hours of tattoo time
• Voltage Range 4.5v – 13v
• Size: 2” L x 1.2” W
• Weight: 1.5 oz
• USB-C Charger Cable Included
• Instruction Manual Included
• The Shorty is one of the lightest & smallest battery packs on the market

* = Critical Connect Universal Batteries are compatible & wirelessly connect with ONLY the Critical Connect Foot Switch (simultaneously, the Critical Connect Foot Switch is ONLY compatible with Critical Connect batteries)Patents:

• US Patent: 10471246
• AU Patent: 2019359618
• CN Patents: Pending
• CA Patents: Pending

Power up to two tattoo machines and enjoy peak-level versatility with the dynamic Vega Tattoo Power Supply from Peak. The Vega allows you to tattoo with or without a footswitch. Easily shift between momentary and continuous modes; or utilize the jumpstart feature to start tattooing with one of your voltage presets.

The Vega power supply features a full-color TFT display screen with a touch user interface for maximum efficiency. Easily toggle your settings, including hourly rate, display color, presets, and more.

Vega has a high quality CNC-machined 6063 billet aluminum housing and a powerful magnetic mounting design like you haven’t seen before. The super strong magnet on the back of the power supply attaches to a ball mounting rod, which lets you pivot and rotate the Vega 360°. The mounting rod threads onto a magnetic base plate. Use the full stand or attach the Vega only to any metal surface to free up workspace and prevent cross-contamination.

The Vega Tattoo Power Supply comes boxed with the sturdy magnetic base plate and mounting rod, power adapter, and user manual.

Key Features:

• Color: Red
• CNC machined 6063 billet aluminum housing
• Measurements: 5” (L) x 3” (W); 0.75” (H)
• Dual machine inputs
• 100v-240v input voltage
• 1.5V-1.8v output voltage with 0.1v adjustment increments
• 3.4A input current; 4A peak current; 2A continuous current
• Works with standard 1/4” clip cords and foot pedal connections
• Foot pedal use optional
• Toggle between continuous and momentary mode
• Jumpstart sends an initial 10V in 0.2s pulse
• Full color TFT display screen shows all settings; touch user interface
• 240 x 320 RGB resolution
• Magnetic mount pivots and rotates power supply 360 degrees
• Magnet bottom on baseplate for Peak-level setup
• 4” (L) x 3.5” (W) base; 3.5” (H) mounting rod
• Helps prevent cross-contamination
• Equipped with mount, base plate, power adapter, and user manual

Kwadron has created a lightweight, high quality professional tattoo power supply that is packed with power. It’s compatible with both coil and rotary tattoo machines and has a hybrid latch built in, making a foot switch optional. The casing is made from a single piece of aluminum machined by CNC.

Specifications:

• Dimensions: 2.76” (L) x 3.15” (W) x 1.38”(H)
• Three digit LED display
• Adjustable voltage range 0-20V
• Voltage Input: 24VDC/ Voltage Output: 2:20VDC – max 3A
• Max power output: 24W
• Lightweight and compact with non-slip base
• Ideal for both coil and rotary tattoo machines
• External power adaptor included

Critical Tattoo presents a solution for when you need a free-standing unit for your power supply with a magnetic surface – the Stand Alone Steel Baseplate.
This durable powder coated baseplate is 1/8” thick with a 6” diameter, a perfect fit for your power supply. It weighs just under one pound and features a rubber bottom that keeps the baseplate in place.

Power supply not included!

Kwadron has created a lightweight, high quality professional tattoo power supply that is packed with power. It’s compatible with both coil and rotary tattoo machines and has a hybrid latch built in, making a foot switch optional. The casing is made from a single piece of aluminum machined by CNC.

Specifications:

• Dimensions: 2.76” (L) x 3.15” (W) x 1.38”(H)
• Three digit LED display
• Adjustable voltage range 0-20V
• Voltage Input: 24VDC/ Voltage Output: 2:20VDC – max 3A
• Max power output: 24W
• Lightweight and compact with non-slip base
• Ideal for both coil and rotary tattoo machines
• External power adaptor included

The only power supply on the current market that allows you to use your choice of cables or connectors - wirelessly. Introducing the Airbolt, the smallest, most portable power supply that has the capabilities to keep your machine running for over 15 hours, depending on voltage. 

You can also connect the Airbolt to the Darklab app via Bluetooth to enable eGive capabilities. 

It’s time to get off the grid and experience wireless procedures.

• Up to 15 hours of battery life*
• Weighs: 3.6 oz (102 g)
• 73mm x 48 mm x 24 mm
• Built-in anti-slip magnetic pad
• For extra support, several wearable and mounting accessories will be coming soon
• Easy to bag/barrier protect
• Voice control and eGive via Darklab app

The only power supply on the current market that allows you to use your choice of cables or connectors -wirelessly. Introducing the Airbolt Mini, the smallest, most portable power supply that has the capabilities to keep your machine running for up to 10 hours*.

With its intuitive controls and LED voltage display, the Airbolt is easy to use and can be paired with the Darklab app via Bluetooth for ultimate wireless control. With unlimited presets you can create within the app's Preset Bank allows artists to have endless possibilities during each session. Weighing at only 3.6 oz (102 g), the Airbolt is compact for easy travel and it’s ready to be bagged or barrier protected.

•  Weighs: 3.6 oz (102 g)
• 55.6 mm x 48 mm x 24 mm
• Up to 10 hours of battery life*
•  Built-in anti-slip magnetic pad
• Easy setup
• For extra support, several wearable and mounting accessories will be coming soon
•  eGive capabilities on the Darklab app via Bluetooth

No frills, just power.

The Critical MNML Power Supply offers steady voltage in its most basic, reliable form. Its wide voltage range of 1.5-17v is adjusted at the turn of a dial. The dense, durable plastic housing of the MNML is easily-bagged and travel ready.

Featuring a single-channel machine output, foot switch connection, an anti-slip silicone base, and a 2-year warranty from one of the most trusted manufacturers in the business.

Features:

• Voltage Range: 1.5 - 17v
• Minimal design for pure functionality
• Voltage adjustments at the turn of a dial
• Built-in magnets for mounting to metal surfaces
• Easily covered for safety
• 2-year manufacturer warranty
• Made in USA

No frills, just power.

The Critical MNML Power Supply offers steady voltage in its most basic, reliable form. Its wide voltage range of 1.5-17v is adjusted at the turn of a dial. The dense, durable plastic housing of the MNML is easily-bagged and travel ready.

Featuring a single-channel machine output, foot switch connection, an anti-slip silicone base, and a 2-year warranty from one of the most trusted manufacturers in the business.

Features:

• Voltage Range: 1.5 - 17v
• Minimal design for pure functionality
• Voltage adjustments at the turn of a dial
• Built-in magnets for mounting to metal surfaces
• Easily covered for safety
• 2-year manufacturer warranty
• Made in USA

Power up to two tattoo machines and enjoy peak-level versatility with the dynamic Vega Tattoo Power Supply from Peak. The Vega allows you to tattoo with or without a footswitch. Easily shift between momentary and continuous modes; or utilize the jumpstart feature to start tattooing with one of your voltage presets.

The Vega power supply features a full-color TFT display screen with a touch user interface for maximum efficiency. Easily toggle your settings, including hourly rate, display color, presets, and more.

The Vega with plastic housing is lighter and more cost-friendly than the aluminum edition but has the same powerful magnetic mounting design. The super strong magnet on the back of the power supply attaches to a ball mounting rod, which lets you pivot and rotate the Vega 360°. The mounting rod threads onto a magnetic base plate. Use the full stand or attach the Vega only to any metal surface to free up workspace and prevent cross-contamination.

The Vega Tattoo Power Supply comes boxed with the sturdy magnetic base plate and mounting rod, power adapter, and user manual.

Key Features:

• Color: Black
• Plastic housing
• Measurements: 5” (L) x 3” (W); 0.75” (H)
• Dual machine inputs
• 100v-240v input voltage
• 1.5V-1.8v output voltage with 0.1v adjustment increments
• 3.4A input current; 4A peak current; 2A continuous current
• Works with standard 1/4” clip cords and foot pedal connections
• Foot pedal use optional
• Toggle between continuous and momentary mode
• Jumpstart sends an initial 10V in 0.2s pulse
• Full color TFT display screen shows all settings; touch user interface
• 240 x 320 RGB resolution
• Magnetic mount pivots and rotates power supply 360 degrees
• Magnet bottom on baseplate for Peak-level setup
• 4” (L) x 3.5” (W) base; 3.5” (H) mounting rod
• Helps prevent cross-contamination
• Equipped with mount, base plate, power adapter, and user manual

Power up to two tattoo machines and enjoy peak-level versatility with the dynamic Vega Tattoo Power Supply from Peak. The Vega allows you to tattoo with or without a footswitch. Easily shift between momentary and continuous modes; or utilize the jumpstart feature to start tattooing with one of your voltage presets.

The Vega power supply features a full-color TFT display screen with a touch user interface for maximum efficiency. Easily toggle your settings, including hourly rate, display color, presets, and more.

Vega has a high quality CNC-machined 6063 billet aluminum housing and a powerful magnetic mounting design like you haven’t seen before. The super strong magnet on the back of the power supply attaches to a ball mounting rod, which lets you pivot and rotate the Vega 360°. The mounting rod threads onto a magnetic base plate. Use the full stand or attach the Vega only to any metal surface to free up workspace and prevent cross-contamination.

The Vega Tattoo Power Supply comes boxed with the sturdy magnetic base plate and mounting rod, power adapter, and user manual.

Key Features:

• Color: Black
• CNC machined 6063 billet aluminum housing
• Measurements: 5” (L) x 3” (W); 0.75” (H)
• Dual machine inputs
• 100v-240v input voltage
• 1.5V-1.8v output voltage with 0.1v adjustment increments
• 3.4A input current; 4A peak current; 2A continuous current
• Works with standard 1/4” clip cords and foot pedal connections
• Foot pedal use optional
• Toggle between continuous and momentary mode
• Jumpstart sends an initial 10V in 0.2s pulse
• Full color TFT display screen shows all settings; touch user interface
• 240 x 320 RGB resolution
• Magnetic mount pivots and rotates power supply 360 degrees
• Magnet bottom on baseplate for Peak-level setup
• 4” (L) x 3.5” (W) base; 3.5” (H) mounting rod
• Helps prevent cross-contamination
• Equipped with mount, base plate, power adapter, and user manual

Simply wave your hand across the top of the NeoTat MagicRay Touch-Free Power Switch to turn it on and off.  It's really that simple!

When the MagicRay is activated by waving your hand across it, its base glows green. 

This power switch has an operating voltage of 0 up to 24v.

This power switch also firmly attaches to any metallic surface using its three magnetic feet for a sturdy and reliable tattoo setup. Easily cover the MagicRay with a layer of barrier for a completely hygienic set-up.

The RPS-600 wireless power supply is a system designed for tattooing without cords attached to the tattoo machines or the foot switch.

Specs

• Output Wireless: 5-13V
• Output Cable: 4-18V
• Compatibility by cable: Various machines and foot switches
• Connections: ¼ phono (6.35mm)
• LCD display: 2.7” 60x33mm
• Powerpack Weight: 65g
• Powerpack Capacity: Approx 5 hours each
• Powerpack Battery life: Approx 500 charging cycles
• Powerpack compatibility: Dragonfly / Stingray
• Powerpack Charging: Approx 1 hour
• Footswitch: Wireless included
• USB: YES (Only for software upgrades)
• Operating temp: 10-35 ̊C Indoor use only
• Input Power: 100-240V 50-60Hz

Package Includes:

• 1 RPS-600 main unit
• 1 WFS Wireless foot switch
• 2 Powerpacks
• 1 Power adapter 24V including power cord
• 1 USB cable
• 1 Custom fitted plastic case

Introducing the Nemesis MX2. The latest product of the Kwadron corporation.

Slimmest power supply on the market, just 18mm thick.

The glass front touch panel is very responsive.  Has a comfortable 360 degrees vice mounted on back panel. External dedicated power supply. Additional on/off switch on top of casing. Manual foot switch. 4 voltage setting programmable. And last but not least, a convenient timer so you can keep track of your time tattooing.

Voltage output range: 18VDC/2A

Voltage display and increments: 0.1V for one touch - 6.30V ; 6.40V ; 6.50V etc.